1、1Discussion on the Transformation of Intelligent Electronic Engineering Structural ModelAbstract. Intelligent products are one of the most popular trends at present and occupy a primary position in many countries. This is a development opportunity for China, so it is necessary to find out the trunk
2、line independent of the backbone of the society, while environmental protection and sustainable development are another two hot topics in the world today. Therefore, the two sides should be combined together, so as to achieve the effect of occupying a position in China. In this paper, the reverse tr
3、ansformation of intelligent electronic engineering structural model is mainly introduced. Key words: Intelligent Electronic Engineering Structural Model; Transformation Technology; Reverse The background of the transformation With the continuous development of science and technology, the living stan
4、dard of people is constantly improved, the requirement of consumers on electronic products is higher and higher, and also the speed of updating electronic products is accelerated without a stop. As a result, the upgrading of 2electronic products is very fast to meet peoples needs, and simultaneously
5、 peoples awareness in environmental protection has been strengthened constantly. Many countries begin to demand manufacturing enterprises to be in charge of the whole life cycle of products, and this is a pretty large chance for China, and especially the recycling and processing of products and the
6、repeated use of resources and products are the transformations of the electronic product structural model in futures. It can constitute a complete system with the positive circulation of resources. In this way, not only certain resources and also certain period of time are saved, so that the require
7、ments of people on update and upgrade can be fulfilled. The reasons why this model is chosen can be generally concluded as follows: First, the environmental resources are less and less at present, and also the available resources for people are also further less, so the resources should be utilized
8、repeatedly and circularly. For enterprises, recycling utilization is of greater benefit, so that the image of products can be improved in the market as a whole. Second, as peoples awareness in environmental protection is enhanced, the higher importance attached by people to 3recycling has forced ent
9、erprises to set up the entire management system of electronic products based on recycling, so this is a general business model in China currently. Also, China provides certain policy support and the provisions of policy in this aspect. Therefore, the mode of sustainable development is necessary to f
10、ollow for meeting the needs of countries and people, and also this is helpful for the long-term development of enterprises. Third, in recent years, the sales volume of the electronic products increases straightly. This is a big market for foreign countries, while the reverse orientation of electroni
11、c products has been the third source of enterprise development. Therefore, the good management in this aspect will add a new vitality into the structural model of electronic products. At present, there has been not a perfect reverse system yet in China, and this will be certainly the biggest consump
12、tion mode of Chinese enterprises. It is necessary for Chinese enterprises to follow the characterized sustainable development mode for occupying a position under the huge pressure of competition. Benefits of electronic products reverse orientation First, the reverse structural mode of electronic pro
13、ducts can help enrich and develop the overall mode of supply chain, 4but the forward development has reached a new peak at present, so a new shortcut should be sought by electronic products enterprises for promoting themselves to get a market share. Currently, this technology is not mature, so a uni
14、que reverse structural model of electronic products should be sought through their unceasing studies. Moreover, the entire work chain of an electronic products enterprise should be determined according to the actual needs, so that an important part of the enterprise strategy is formed, namely a part
15、 of the most competitive. Second, the reverse structural mode of electronic products can help upgrade an enterprise and form their own system, so an efficient reverse structural mode is chosen. For a long time, the awareness of people in this respect is not sufficient, and the domestic electronics p
16、roducts enterprises and even if some manufacturing giants also think that reverse orientation is only an environmental protection policy, but the absence of a correct theory instruction has forced most enterprises to be in a wait-and-see attitude. However, this is really a project very easy to devel
17、op, and a path appropriate for the development can be found as long as a certain theoretical basis is available, and then a foothold can be gained in the fiercely competitive 5domestic environment. New characteristics of the change of intelligent electronic engineering model The reverse types as wel
18、l as their functions and organizational structures are not identical, but their structure characteristics are mainly concentrated in the following aspects. First, concentration refers to the quantity of the sites where the same operation is completed on the same network. In a concentrated network, t
19、he same type of operations will be automatically completed in the same place and also the resources will be shared, and simultaneously certain manpower and material resources will be saved so that an economic scale is formed. This is also the most effective measure for completing the reverse orienta
20、tion, and represents the size of the network. Second, network layers refer to the number of the reverse facilities, and also represent the vertical depth of the network. All of the automatic operations are completed in some operation facilities in a single-layer network, but will be completed in dif
21、ferent operation facilities in a multilayer network. Third, network correlation refers to the correlation 6between the reverse automatic indexing system of products and the current forward system. If the correlation between the two sides is very high, it suggests that the link of the whole system is
22、 integral. Thus, the construction can be made in the original basis in the process of recycling. Fourth, networks openness means that the networks of reverse current are closed and open. In the entire network, recycled products will be soon put into the market after processed by manufacturers. Howev
23、er, in open network, products flow from one end to the other end, so that a loop network is constituted as a whole. This is of certain great significance to the completion of enterprises whole system. Fifth, the cooperation between organizations is the most important for an entire company, and this
24、means that a necessary relationship exists between different parties in the core of reverse network construction and operation. The best of an enterprise is to cooperate with other enterprises, so that a network is commonly formed. Thus, all enterprises are in a network, and then a vicious competiti
25、on situation is no longer in existence and all kinds of relationship between each other will be formed. This is a common way. Reverse design factors of electronic engineering 7structural model First, the characteristics of product itself are considered. The physical characteristics and economic attr
26、ibutes of old products have a great influence on the whole layout; the recycling ways are very different, the reverse devices and the related investment cost are re-used, re-created, and re-recycled. Therefore, the characteristics between different products will lead to the different characteristics
27、 of the final products, and also the recycling degree is different. As a result, the forms of the network are different. Second, the market factors are very important, and the reverse characteristics are permeated into all roles of the market. This plays a very important influence on the final rever
28、se supply solution and the formation of the final reverse orientation; for the participants, there will be certain rights as long as the responsibilities are in existence. The two sides are in existence at the same time, and the relationship between the participants also constitutes a reverse specif
29、ic environment. The quality of this environment directly affects the components of the entire network. If the environment is not perfect enough, the reverse and forward unified system will eventually led to the different network structure. Third, 8the related resources include public recycling facil
30、ities, private recycling facilities, transportation resources, and human resources, and the first several factors directly influence the structure of the whole network. For the entire network, it plays an irreplaceable role and restricts the operating costs of the entire network as well as the subse
31、quent large economic benefits; the use of certain items is limited by law in a certain scope, and it is provisioned that certain special environment and human resource are the core of the whole system. Also, the personnel of high qualities should manage the entire network, including the call of huma
32、n resources. Thus, the personnel are required to possess management ability and coordination ability. In the meantime, attention should be paid to the making of contracts including the current contracts and possible future contracts. These have an important influence on the whole design network. Fou
33、rth, reverse orientation also affects the whole design of the whole network, and owns commonness and fundamental difference compared with the traditional supply chains. Conclusion In this paper, the core direction of intelligent electronics engineering structural models transformation is 9reverse, a
34、nd a set of strategies according with commodity characteristics is considered in combination with the characteristics of product itself, and also general structural form and reverse characteristics for the basic flow of electronic products reverse orientation are designed, which is also a strategy t
35、o reduce the cost finally. Under the huge pressure of the competition, this is definitely a good strategy, and it is believed to attain a better development in the future. References 1 Ye Zhou, Xia Lin, Hui He. Reverse Network Research in the Extended Responsibility of Producers J. Modernization, 20
36、09 (8). 2 Xi Wang. Electronic Waste Recycling Network System based on GIS J. Southwest Jiaotong University, 2010（5). 3 Haiyan Wang. Study on Chinas Reverse Development J. Wuhan University of Technology, 2009 (3). 4 Yunli Zhang, Zhiwen Zhang, Zhipengg Fu. Construction of the Reverse Logistics Joint Recycling Model of Chinas Wasted Electronic Products J. Shenyang university of technology, 2011 (8). 5 Ming Jiang. Study on the Selection of the Reverse 10Recycling Models under Closed-loop and Open-loop Supply Chain J. Southwest university of science and technology, 2011 (5).
