1、1 UA741电源电压 （-3-18 ）（+3+15） 输入失调电压 2mV 输入失调电流 2nA 开环电压增益 106DB 输入电阻 1M 输出电阻 75 BGP ：1MHZ摆率：0.5V/us Kcmr:90Db 功耗：50Mw 输入范围：-13+13V 2 LF356 HIGH SPEED J-FET OP-AMPs : up to 20MHz,50V/us OFFSET VOLTAGE ADJUSTMENT DOES NOT DEGRADE DRIFT OR COMMON-MODE REJECTION AS IN MOST OF MONOLITHIC AMPLIFIERS INTERN
2、AL COMPENSATION AND LARGE DIFFERENTIAL INPUT VOLTAGE CAPABILITY(UP TO VCC+) CMR，SVR :80-100Db VOPP Output Voltage Swing （RL = 10kW，RL = 2kW）= 12 Input Offset Voltage Drift (RS = 50W) - (note 2) 5 uV/oC Ri Input Resistance (Tamb = 25oC) =1012 欧姆 Ci Input Capacitance (Tamb = 25oC) =3 pF3 OP07 Unity-ga
3、in bandwidth (25C )= 0.4 0.6 MHz ri Input resistance (25C )= 7 31 M CMRR Common V RS (25C) =94 110Db 可调零4 OP375 AD811 High Speed：140 MHz Bandwidth (3 dB, G = +1)；120 MHz Bandwidth (3 dB, G = +2)； 5 MHz Bandwidth (0.1 dB, G = +2) 2500 V/us Slew Rate(15V) 25 ns Settling Time to 0.1% (For a 2 V Step)；6
4、5 ns Settling Time to 0.01% (For a 10 V Step) Excellent Video Performance (RL =150 V) 0.01% Differential Gain, 0.01 Differential Phase Voltage Noise of 1.9 nVHz Low Distortion: THD = 74 dB 10 MHz Excellent DC Precision：3 mV max Input Offset Voltage Specified for 5 V and 15 V Operation +-2.3 V Output
5、 Swing into a 75 V Load (VS = 5 V) Common-Mode Input Voltage . . . . . . . . . . . . . . . . . . . . . VS Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . .6 V OUTPUT CHARACTERISTICS Voltage Swing, Useful Operating Range5 5 V 2.9 V 15 V 12 V Output Current = 100 mA Short-Ci
6、rcuit Current = 150 mA Output Resistance (Open Loop 5 MHz)= 9 9 W INPUT CHARACTERISTICS +Input Resistance : 1.5 MW Input Resistance : 14 W Input Capacitance +Input = 7.5 pF Common-Mode Voltage Range =13 V6.AD84460 MHz, 2000 V/ms Monolithic Op Amp Wide Bandwidth: 60 MHz at Gain of 1, 33 MHz at Gain o
7、f 10 Very High Output Slew Rate: Up to 2000 V/ms 20 MHz Full Power Bandwidth, 20 V pk-pk, RL = 500 V Fast Settling: 100 ns to 0.1% (10 V Step) Differential Gain Error: 0.03% at 4.4 MHz Differential Phase Error: 0.158 at 4.4 MHz High Output Drive: 650 mA into 50 Load Low Offset Voltage: 150 mV max (B
8、 Grade) Low Quiescent Current: 6.5 Ma Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 V Voltage Swing Bandwidth Product . . . . . . . . . . . 350 V-MHz |VHVIN| . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 V |VLVIN| . . . . . . . . .
9、. . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 V1. The AD844 is a versatile, low cost component providing an excellent combination of ac and dc performance. It may be used as an alternative to the EL2020 and CLC400/1.2. It is essentially free from slew rate limitations. Rise and fall time
10、s are essentially independent of output level.3. The AD844 can be operated from 4.5 V to 18 V power supplies and is capable of driving loads down to 50 , as well as driving very large capacitive loads using an externalnetwork.4. The offset voltage and input bias currents of the AD844 are laser trimm
11、ed to minimize dc errors; VOS drift is typically 1 V/C and bias current drift is typically 9 nA/C.5. The AD844 exhibits excellent differential gain and differential phase characteristics, making it suitable for a variety of video applications with bandwidths up to 60 MHz.6. The AD844 combines low di
12、stortion, low noise and low drift with wide bandwidth, making it outstanding as an input amplifier for flash A/D converters.7.AD8048/AD8047250 MHz, General Purpose Voltage Feedback Op Amps Wide Bandwidth AD8047, G = +1 AD8048, G = Small Signal 250 MHz 260 MHz Large Signal (2 V p-p) 130 MHz 160 MHz 5
13、.8 mA Typical Supply Current Low Distortion, (SFDR) Low Noise : 66 dBc typ 5 MHz 54 dBc typ 20 MHz 5.2 nV/Hz (AD8047), 3.8 nV/Hz (AD8048) Noise Drives 50 pF Capacitive Load High Speed Slew Rate 750 V/s (AD8047), 1000 V/s (AD8048) Settling 30 ns to 0.01%, 2 V Step 3 V to 6 V Supply Operation8. AD8037
14、Low Distortion, Wide Bandwidth Voltage Feedback Clamp AmpsSuperb Clamping Characteristics3 mV Clamp Error1.5 ns Overdrive RecoveryMinimized Nonlinear Clamping Region240 MHz Clamp Input Bandwidth3.9 V Clamp Input RangeWide Bandwidth AD8036 AD8037Small Signal 240 MHz 270 MHzLarge Signal (4 V p-p) 195
15、MHz 190 MHzGood DC Characteristics2 mV Offset10 mV/8C DriftUltralow Distortion, Low Noise72 dBc typ 20 MHz4.5 nV/Hz Input Voltage NoiseHigh SpeedSlew Rate 1500 V/msSettling 10 ns to 0.1%, 16 ns to 0.01%63 V to 65 V Supply Operation9.LM6132Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers(For
16、5V Supply, Typ Unless Noted)n Rail-to-Rail input CMVR 0.25V to 5.25Vn Rail-to-Rail output swing 0.01V to 4.99Vn High gain-bandwidth, 10 MHz at 20 kHzn Slew rate 12 V/sn Low supply current 360 A/Ampn Wide supply range 2.7V to over 24Vn CMRR 100 dBn Gain 100 dB with RL = 10kn PSRR 82 dBGBW Gain-Bandwi
17、dth Product at supply=5v f = 20 kHz 10 MHzLM6132 can drive capacitive loads as large as 500 pF at unity gain and not oscillate.10.LM6171High Speed Low Power Low Distortion Voltage Feedback Amplifiern Easy-To-Use Voltage Feedback Topologyn Very High Slew Rate: 3600V/sn Wide Unity-Gain-Bandwidth Produ
18、ct: 100 MHzn 3 dB Frequency AV = +2: 62 MHzn Low Supply Current: 2.5 mAn High CMRR: 110 dBn High Open Loop Gain: 90 dBn Specified for 15V and 5V OperationRIN Input Resistance Common Mode 40 M欧Differential Mode 4.9M欧RO Open Loop 14 欧The LM6171 is a high speed, unity-gain stable voltage feedback ampli
19、fier. It consumes only 2.5 mA supply current while providing a gain-bandwidth product of 100 MHz and a slew rate of 3600V/s. It also has other great features such as low differential gain and phase and high output current. The LM6171 is a good choice in high speed circuits. The LM6171 is a true volt
20、age feedback amplifier. Unlike current feedback amplifiers (CFAs) with a low inverting input impedance and a high non-inverting input impedance, both inputs of voltage feedback amplifiers (VFAs) have high impedance nodes. The low impedance inverting input in CFAs will couple with feedback capacitor
21、and cause oscillation.As a result, CFAs cannot be used in traditional op amp circuits such as photodiode amplifiers, I-to-V converters and integrators.11LM617212THS3001, THS3002420-MHz HIGH-SPEED CURRENT-FEEDBACK AMPLIFIERS_ High Speed 420 MHz Bandwidth (G = 1, 3 dB) 6500 V/s Slew Rate 40-ns Settlin
22、g Time (0.1%)_ High Output Drive, IO = 100 mA_ Excellent Video Performance 115 MHz Bandwidth (0.1 dB, G = 2) 0.01% Differential Gain 0.02Differential Phase_ Low 3-mV (max) Input Offset Voltage_ Very Low Distortion THD = 96 dBc at f = 1 MHz THD = 80 dBc at f = 10 MHz_ Wide Range of Power Supplies VCC
23、 = 4.5 V to 16 V_ Evaluation Module AvailableThe THS300x is a high-speed current-feedback operational amplifier, ideal for communication,imaging, and high-quality video applications. This device offers a very fast 6500-V/s slew rate, a 420-MHz bandwidth, and 40-ns settling time for large-signal appl
24、ications requiring excellent transient response. In addition, the THS300x operates with a very low distortion of 96 dBc,making it well suited for applications such as wireless communication basestations or ultrafastADC or DAC buffers.13MAX4305740MHz, Low-Noise, Low-DistortionOp Amps in SOT23-5SUPPLY
25、（-5V +5V）闭环输出阻抗 1欧姆10MHz,RL=100 9欧姆10MHz,RL=100K Low 2.1nV/Hz Voltage Noise Density Ultra-High 740MHz -3dB Bandwidth (MAX4304,AVCL = 2V/V) 100MHz 0.1dB Gain Flatness (MAX4104/4105) 1400V/s Slew Rate (MAX4105/4305) -88dBc SFDR (5MHz, RL = 100) (MAX4104/4304) High Output Current Drive: 70mA Low Differ
26、ential Gain/Phase Error: 0.01%/0.01(MAX4104/4304) Low 1mV Input Offset VoltageThe MAX4105 is compensated for a minimum gain of +5V/V and delivers a 410MHz bandwidth and a 1400V/sec slew rate. The MAX4305 has +10V/V minimum gain compensation and delivers a 340MHz bandwidth and a 1400V/s slew rate. Lo
27、w voltage noise density of 2.1nV/Hz and -88dBcspurious-free dynamic range make these devices ideal for low-noise/low-distortion video and telecommunications applications. These op amps also feature a wide output voltage swing of 3.7V and 70mA output current drive capability.14 OPA4354(pay attention
28、to supply can not beyond 5v)voltage-feedback 250MHz, Rail-to-Rail I/O, CMOS OPERATIONAL AMPLIFIERS_ UNITY-GAIN BANDWIDTH: 250MHz_ WIDE BANDWIDTH: 100MHz GBW_ HIGH SLEW RATE: 150V/s_ LOW NOISE: 6.5nV/Hz_ RAIL-TO-RAIL I/O_ HIGH OUTPUT CURRENT: 100mA_ EXCELLENT VIDEO PERFORMANCE:Diff Gain: 0.02%, Diff
29、Phase: 0.09_0.1dB Gain Flatness: 40MHz_ LOW INPUT BIAS CURRENT: 3pA_ QUIESCENT CURRENT: 4.9mA_ THERMAL SHUTDOWN_ SUPPLY RANGE: 2.5V to 5.5V15.INA155Single-Supply, Rail-to-Rail Output, CMOS INSTRUMENTATION AMPLIFIER低输出阻抗l RAIL-TO-RAIL OUTPUT SWING: Within 10mVl LOW OFFSET VOLTAGE: 200Vl LOW OFFSET DR
30、IFT: 5V/Cl INTERNAL FIXED GAIN = 10V/V OR 50V/Vl SPECIFIED TEMPERATURE RANGE:55C to +125Cl LOW INPUT BIAS CURRENT: 0.2pAl WIDE BANDWIDTH: 550kHz in G = 10l HIGH SLEW RATE: 6.5V/s16.MAX414Quad 28Mhz,low noise low voltage precision op ampCmrr 105-120db psrr 90-94db 可调零 可可驱动nF级容性负载17.INA322microPower,
31、Single-Supply, CMOS INSTRUMENTATION AMPLIFIERThe power supply should be capacitively decoupled with 0.1F capacitors as close to the INA322 as possible for noisy or high-impedance applications. The output is referred to the reference terminal, which must be at least 1.2V below the positive supply rai
32、l.18.OPA2277High Precision OPERATIONAL AMPLIFIERSl ULTRA LOW OFFSET VOLTAGE: 10Vl ULTRA LOW DRIFT: 0.1V/Cl HIGH OPEN-LOOP GAIN: 134dBl HIGH COMMON-MODE REJECTION: 140dBl HIGH POWER SUPPLY REJECTION: 130dBl LOW BIAS CURRENT: 1nA maxl WIDE SUPPLY RANGE: 2V to 18Vl LOW QUIESCENT CURRENT: 800A/amp19.INA
33、129Precision, Low Power INSTRUMENTATION AMPLIFIERSl LOW OFFSET VOLTAGE: 50V maxl LOW DRIFT: 0.5V/C maxl LOW INPUT BIAS CURRENT: 5nA maxl HIGH CMR: 120dB minl INPUTS PROTECTED TO 40Vl WIDE SUPPLY RANGE: 2.25 to 18VLOW QUIESCENT CURRENT: 700ASLOW RATE 4V/usTheir versatile 3-op amp design and small siz
34、e make them ideal for a wide range of applications. Current-feedback input circuitry provides wide bandwidth even at high gain (200kHz at G = 100).A single external resistor sets any gain from 1 to 10,000. INA128 provides an industry standard gainequation; INA129s gain equation is compatible with th
35、e AD620.20.INA157High-Speed, Precision DIFFERENCE AMPLIFIERl LOW OFFSET VOLTAGE: 500V maxl LOW OFFSET DRIFT: 2V/Cl LOW GAIN ERROR: 0.05% maxl WIDE BANDWIDTH: 3MHzl HIGH SLEW RATE: 14V/sl FAST SETTLING TIME: 3s to 0.01%l WIDE SUPPLY RANGE: 4V to 18Vl LOW QUIESCENT CURRENT: 2.4mA输入阻抗只有几十 K可驱动 500PF 容性
36、负载Offset Adjustment21.LME49720Dual High Performance, High Fidelity Audio Operational AmplifierCommon-Mode Rejection 10VVcm10V 120 -110 dB (min)Power Supply Voltage Range 2.5V to 17VRL = 2k 0.00003% (typ)RL = 600 0.00003% (typ) Input Noise Density 2.7nV/Hz (typ) Slew Rate 20V/s (typ) Gain Bandwidth P
37、roduct 55MHz (typ) Open Loop Gain (RL = 600) 140dB (typ) Input Bias Current 10nA (typ) Input Offset Voltage 0.1mV (typ) DC Gain Linearity Error 0.000009%Features Easily drives 600 loads Optimized for superior audio signal fidelity Output short circuit protection PSRR and CMRR exceed 120dB (typ)The L
38、ME49720 combines extremely low voltage noise density (2.7nV/Hz) with vanishingly low THD+N (0.00003%) to easily satisfy the most demanding audio applications. To ensure that the most challenging loads are driven without compromise, the LME49720 has a high slew rate of 20V/s and an output current cap
39、ability of 26mA. Further, dynamic range is maximized by an output stage that drives 2k loads to within 1V of either power supply voltage and to within 1.4V when driving 600 loads. The LME49720s outstanding CMRR (120dB), PSRR (120dB), and VOS (0.1mV) give the amplifier excellent operational amplifier
40、 DC performance.The LME49720 has a wide supply range of 2.5V to 17V.Over this supply range the LME49720s input circuitry maintains excellent common-mode and power supply rejection, as well as maintaining its low input bias current. The LME49720 is unity gain stable. This Audio Operational Amplifier
41、achieves outstanding AC performance while driving complex loads with values as high as 100pF.22.INA143High-Speed, Precision, G = 10 or G = 0.1DIFFERENCE AMPLIFIERSl G = 10V/V or G = 0.1V/Vl LOW OFFSET VOLTAGE:250V max, 3V/C maxl LOW GAIN ERROR: 0.01%l HIGH SLEW RATE: 5V/sl FAST SETTLING TIME: 9s to 0.01%l LOW QUIESCENT CURRENT: 950A
