1、1 A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?DSLdialupsatelliteleased linecable modem2 What is the purpose of having a conver
2、ged network?to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining the communication infrastructure3
3、 What characteristic of a network enables it to quickly grow to support new users and applications without impacting the performance of the service being delivered to existing users?reliabilityscalabilityquality of serviceaccessibility4 Which connection provides a secure CLI session with encryption
4、to a Cisco switch?a console connectionan AUX connectiona Telnet connectionan SSH connection5 A network technician is attempting to configure an interface by entering the following command: SanJose(config)# ip address 192.168.2.1 255.255.255.0. The command is rejected by the device. What is the reaso
5、n for this?The command is being entered from the wrong mode of operation.The command syntax is wrong.The subnet mask information is incorrect.The interface is shutdown and must be enabled before the switch will accept the IP address.6 After several configuration changes are made to a router, the cop
6、y running-configuration startup-configuration command is issued. Where will the changes be stored?flashROMNVRAMRAMthe configuration registera TFTP server7Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the command ba
7、nner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the banner does not appear correctly. What is the problem?The banner message is too long.The delimiting character appears in the banner message.The symbol “!” signals the end of a banner message.Messa
8、ge-of-the-day banners will only appear when a user logs in through the console port.8 What are three characteristics of an SVI? (Choose three.)It is designed as a security protocol to protect switch ports.It is not associated with any physical interface on a switch.It is a special interface that all
9、ows connectivity by different types of media.It is required to allow connectivity by any device at any location.It provides a means to remotely manage a switch.It is associated with VLAN1 by default.9 A technician configures a switch with these commands:SwitchA(config)# interface vlan 1 SwitchA(conf
10、ig-if)# ip address 192.168.1.1 255.255.255.0 SwitchA(config-if)# no shutdown What is the technician configuring?Telnet accessSVIpassword encryptionphysical switchport access10 In computer communication, what is the purpose of message encoding?to convert information to the appropriate form for transm
11、issionto interpret informationto break large messages into smaller framesto negotiate correct timing for successful communication11 What protocol is responsible for controlling the size of segments and the rate at which segments are exchanged between a web client and a web server?TCPIPHTTPEthernet12
12、 What are two benefits of using a layered network model? (Choose two.)It assists in protocol design.It speeds up packet delivery.It prevents designers from creating their own model.It prevents technology in one layer from affecting other layers.It ensures a device at one layer can function at the ne
13、xt higher layer.13 What is the process of dividing a data stream into smaller pieces before transmission?segmentationencapsulationencodingflow control14 When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for a
14、n IPv4 address?DNS server addresssubnet maskdefault gatewayDHCP server address15 A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI
15、model is the error categorized?presentation layernetwork layerphysical layerdata link layer16 A network engineer is measuring the transfer of bits across the company backbone for a mission critical database application. The engineer notices that the network throughput appears lower than the bandwidt
16、h expected. Which three factors could influence the differences in throughput? (Choose three.)the amount of traffic that is currently crossing the networkthe sophistication of the encapsulation method applied to the datathe type of traffic that is crossing the networkthe latency that is created by t
17、he number of network devices that the data is crossingthe bandwidth of the WAN connection to the Internetthe reliability of the gigabit Ethernet infrastructure of the backbone17 Which type of UTP cable is used to connect a PC to a switch port?consolerollovercrossoverstraight-through18 What is a char
18、acteristic of the LLC sublayer?It provides the logical addressing required that identifies the device.It provides delimitation of data according to the physical signaling requirements of the medium.It places information in the frame allowing multiple Layer 3 protocols to use the same network interfa
19、ce and media.It defines software processes that provide services to the physical layer.19 What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.)error correction through a collision detection methodsession control using port numbersdata link layer addressingplace
20、ment and removal of frames from the mediadetection of errors through CRC calculationsdelimiting groups of bits into framesconversion of bits into data signals20 What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address?It
21、 will discard the frame.It will forward the frame to the next host.It will remove the frame from the media.It will strip off the data-link frame to check the destination IP address.21 What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first I
22、P address in the frame headerusing the source MAC addresses of frames to build and maintain a MAC address tableforwarding frames with unknown destination IP addresses to the default gatewayutilizing the MAC address table to forward frames via the destination MAC addressexamining the destination MAC
23、address to add new entries to the MAC address table22 What are two examples of the cut-through switching method? (Choose two.)store-and-forward switchingfast-forward switchingCRC switchingfragment-free switchingQOS switching23Refer to the exhibit. If host A sends an IP packet to host B, what will th
24、e destination address be in the frame when it leaves host A?DD:DD:DD:DD:DD:DD172.168.10.99CC:CC:CC:CC:CC:CC172.168.10.65BB:BB:BB:BB:BB:BBAA:AA:AA:AA:AA:AA24 What are two services provided by the OSI network layer? (Choose two.)performing error detectionrouting packets toward the destinationencapsula
25、ting PDUs from the transport layerplacement of frames on the mediacollision detection25 What information is added during encapsulation at OSI Layer 3?source and destination MACsource and destination application protocolsource and destination port numbersource and destination IP address26 What are tw
26、o functions of NVRAM? (Choose two.)to store the routing tableto retain contents when power is removedto store the startup configuration fileto contain the running configuration fileto store the ARP table27Refer to the exhibit. The network administrator for a small advertising company has chosen to u
27、se the 192.168.5.96/27 network for internal LAN addressing. As shown in the exhibit, a static IP address is assigned to the company web server. However, the web server cannot access the Internet. The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server
28、can access the Internet, and the web server is able to ping local workstations. Which component is incorrectly configured?subnet maskDNS addresshost IP addressdefault gateway address28 Why does a Layer 3 device perform the ANDing process on a destination IP address and subnet mask?to identify the br
29、oadcast address of the destination networkto identify the host address of the destination hostto identify faulty framesto identify the network address of the destination network29 What are the three ranges of IP addresses that are reserved for internal private use? (Choose three.)10.0.0.0/864.100.0.
30、0/14127.16.0.0/12172.16.0.0/12192.31.7.0/24192.168.0.0/1630 Which three addresses are valid public addresses? (Choose three.)198.133.219.17192.168.1.24510.15.250.5128.107.12.117192.15.301.24064.104.78.22731 What type of IPv6 address is FE80:1?loopbacklink-localmulticastglobal unicast32Refer to the e
31、xhibit. On the basis of the output, which two statements about network connectivity are correct? (Choose two.)There is connectivity between this device and the device at 192.168.100.1.The connectivity between these two hosts allows for videoconferencing calls.There are 4 hops between this device and
32、 the device at 192.168.100.1.The average transmission time between the two hosts is 2 milliseconds.This host does not have a default gateway configured.33 Which subnet would include the address 192.168.1.96 as a usable host address?192.168.1.64/26192.168.1.32/27192.168.1.32/28192.168.1.64/2934 How m
33、any hosts are addressable on a network that has a mask of 255.255.255.248?268141625435 Which statement is true about variable-length subnet masking?Each subnet is the same size.The size of each subnet may be different, depending on requirements.Subnets may only be subnetted one additional time.Bits
34、are returned, rather than borrowed, to create additional subnets.36Refer to the exhibit. Consider the IP address of 192.168.10.0/24 that has been assigned to a high school building. The largest network in this building has 100 devices. If 192.168.10.0 is the network number for the largest network, w
35、hat would be the network number for the next largest network, which has 40 devices?192.168.10.0192.168.10.128192.168.10.192192.168.10.224192.168.10.24037 In what two situations would UDP be the preferred transport protocol over TCP? (Choose two.)when applications need to guarantee that a packet arri
36、ves intact, in sequence, and unduplicatedwhen a faster delivery mechanism is neededwhen delivery overhead is not an issuewhen applications do not need to guarantee delivery of the datawhen destination port numbers are dynamic38 What important information is added to the TCP/IP transport layer header to ensure
