1、中文名称: 美国工业用紧固件学会 英文名称: Industrial Fasteners Institute简介: IFI 成立于 1931 年，原名为美国螺栓、螺母和铆钉制造商学会(American Institute of Bolt, Nut and Rivet Manufacturers)。由北美螺栓、螺母、螺丝、铆钉及工业用各种特殊型号的紧固件制造商组成。与国内和国际技术组织合作，共同制订紧固件标准和技术规程，确保用户以最低的装配成本实现最大的工程效益和可靠性。紧固件和元件共有标准件 500,000 多个，特殊形式、尺寸的专用件 3，000，000 多个。出版紧固件标准集，这是机械紧固件
2、用户的主要参考书。书中收集了有关的标准，提供了所有各种形式通用商业工业紧固件的情况。各行业的设计工程师和生产经理都使用这本标准集。标准编号：标准代号IFI+三位数字例：IFI-153-2003 Stainless Steel Wire and Rods for Mechanical Fasteners 机械紧固件的不锈钢线和杆 IFI 通过其网站提供 Technical Reference Books、Additional Reference Books、Information Papers、VCR Tapes、IFI Standards、Fastener Quality Act Compli
3、ance Guide 等信息服务。IFI 第三版紧固件标准目录(米制) IFI 第三版紧固件标准目录( 米制) 发布时间：2007-01-25A 部分：螺纹标准代号 标准名称(中文) 标准名称(英文)IFI 公制螺纹基础 Basics of Metric Screw ThreadsASME B1.7M-1984(R2001) 螺纹的术语、定义和字母代号Nomenclature, Definitions, and Letter Symbols for Screw Threads Revision of ANSI B1.7-1977 ASME B1.13M-2001 米制螺纹：M 型 Metric
4、 Screw Threads: M ProfileASME B1.3M-1992(R2001)允许尺寸的螺纹测量系统 英制和米制螺纹（UN, UNR, UNJ, M, 和 MJ）Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) Errata - 1994 ASME B1.16M-1984(R2001) 米制 M 型螺纹的量规和测量Gages and Gaging for Metric M Screw Threads
5、 Revision of ANSI B1.16-1972 B 部分：材料和涂镀IFI 紧固件材料选择 Selecting Fastener MaterialsIFI 螺栓和螺母的匹配 Bolt and Nut CompatibilityIFI 腐蚀作用 CorrosionIFI 镀层和涂层 Platings and CoatingsASTM F568M-2004 碳合金钢外螺纹米制紧固件规格 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners ASTM A563M-2004
6、 碳素钢和合金钢螺母规格(米制) Standard Specification for Carbon and Alloy Steel Nuts Metric ASTM F738M-2002不锈钢金属螺栓、螺钉及螺柱规格(米制) Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs ASTM F836M-2002 米制 1 型不锈钢螺母规格Standard Specification for Style 1 Stainless Steel Metric Nuts ASTM F468M-2006普通有色
7、金属螺栓、六角帽螺钉和螺柱规格(米制) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Metric ASTM F467M-2006 普通有色金属螺母规格(米制) Standard Specification for Nonferrous Nuts for General Use Metric ASTM F788/F788M-2005英制和米制系列螺栓、螺钉和柱螺栓表面不连续性规格 Standard Specification for Surface Discontin
8、uities of Bolts, Screws, and Studs, Inch and Metric Series ASTM F812/F812M-2003英制和米制系列螺母表面不连续性规格Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series ASTM F606M-2005 实施测定外螺纹及内螺纹紧固件、垫 Standard Test Methods for Determining the 圈及铆钉的机械性能的试验方法(米制)Mechanical Properties of Ext
9、ernally and Internally Threaded Fasteners, Washers, and Rivets MetricASTM F871M-1998 加螺纹元部件电镀层标准规范(米制 )Standard Specification for Electrodeposited Coatings on Threaded Components MetricASTM B633-1998e1 钢铁表面电解沉积锌镀层规格 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel ASTM
10、B766-1986(2003) 镉电沉积镀层规格 Standard Specification for Electrodeposited Coatings of Cadmium ASTM A153/A153M-2005 钢铁构件镀锌层（热浸）规格Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware ASTM B695-1991 钢铁表面锌机械沉积镀层规格Standard Specification for Coatings of Zinc Mechanically Deposited on Ir
11、on and Steel ASTM B696-2000(2004)e1 镉机械沉积锌镀层的规格Standard Specification for Coatings of Cadmium Mechanically Deposited ASTM F1136-2004 紧固件用铬/锌防蚀镀层的规格Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners ASTM F1135-1999(2004) 紧固件用铬酸镉或锌有机防蚀镀层的规格Standard Specification for C
12、admium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners ASTM F1137-2000紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层的规格 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners C 部分：螺栓、螺钉和螺柱ASME B18.2.3.1M-2005 米制六角帽螺钉 Metric Hex Cap Screws ASME B18.2.3.2M
13、-2005 米制成形六角螺钉 Metric Formed Hex Screws ASME B18.2.3.3M-1979(R2001) 米制粗六角螺钉Metric Heavy Hex Screws Errata - April 1981 ASME B18.2.3.4M-2001 米制六角法兰螺钉Metric Hex Flange Screws Supersedes IFI 536:1982 ASME B18.2.3.5M-1979(R2001) 米制六角螺栓 Metric Hex Bolts Errata - May 1981 ASME B18.2.3.6M-1979(R1995) 米制粗六角
14、螺栓 Metric Heavy Hex Bolts Errata - April 1981 ASME B18.2.3.8M-1981(R1999) 米制六角木螺钉 Metric Hex Lag Screws ASME B18.2.3.9M-2001 米制粗六角法兰螺钉Metric Heavy Hex Flange Screws Supersedes IFI 538:1982 ASME B18.2.3.10M-96 方头螺栓（米制系列） Square Head Bolts (Metric Series) IFI 528-1999 Metric Studs and Bent BoltsASME B
15、18.5.2.1M- 米制圆头短方颈螺栓 Metric Round Head Short Square Neck Bolts 1996(R2003) Erratum - October 2001; Erratum - May 2003 ASME B18.5.2.2M-1982(R1993) 米制圆头方颈螺栓 Metric Round Head Square Neck Bolts IFI 544-1998 Metric Round Head Ribbed Neck Bolts ASME B18.5.2.3M-1990(R2003) 大圆头方颈螺栓（米制系列）Round Head Square N
16、eck Bolts with Large Head (Metric Series) ASME B18.2.7.1M-2002 米制 12 键槽凸缘螺钉 Metric 12-Spline Flange Screws Erratum 12/2002 D 部分：螺母 ASME B18.2.4.1M-2002 米制 1 型六角螺母 Metric Hex Nuts, Style 1ASME B18.2.4.2M-2005 米制 2 型六角螺母 Metric Hex Nuts, Style 2 ASME B18.2.4.3M-1979(R2001) 米制六角开槽螺母 Metric Slotted Hex
17、Nuts Errata - May 1981 ASME B18.2.4.4M-1982(R1999) 米制六角凸缘螺母 Metric Hex Flange Nuts ASME B18.2.4.5M-1979(R2003) 米制六角锁紧螺母 Metric Hex Jam Nuts Errata - May 1981 ASME B18.2.4.6M-1979(R2003) 米制粗六角螺母 Metric Heavy Hex Nuts Errata - April 1981 E 部分：有效力矩紧固件IFI 自锁紧固件介绍 Introduction to Locking FastenersIFI-524
18、-1996非金属嵌件公制有效力矩型螺钉性能试验方法Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque ScrewsIFI-525-1996公制化学涂镀有效力矩型螺钉性能试验方法Test Procedure for the Performance of Metric Chemical Coated Prevailing-Torque ScrewsASME B18.16.3M-1998有效力矩型米制钢六角螺母和六角法兰螺母的尺寸要求Dimensional Requi
19、rements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange NutsASME B18.16.1M-1979有效力矩型米制钢六角螺母和六角法兰螺母的机械和性能要求Mechanical and Performance Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Errata - December 1980 R(2001)ASME B18.16.2M-1979有效力矩型米制钢六角螺母和六角法兰螺母的
20、转矩应力试验要求*Torque-Tension Test Requirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts R(2001)IFI-543-1999公制内外螺纹紧固件扭-拉关系评估测试Test for Evaluating the Torque-Tension Relationship on Both External and Interal Metric Threaded FastenersF 部分 :高强度螺栓 STRUCTURAL BOLTINGIFI 高强度结构螺栓的解释和说
21、明COMMENTARY ON HIGH STRENGTH STRUCTURAL BOLTINGASME B18.2.3.7M-1979(R2001) 米制粗六角结构螺栓 Metric Heavy Hex Structural Bolts Errata - April 1981 ASTM A325M-2005最小抗拉强度为 830 MPa 的热处理结构钢螺栓规格（公制）Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength Metric ASTM A490M
22、-2004a结构钢接合用等级为 10.9 和 10.9.3 的高强度螺栓规格(米制) Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints Metric ASTM F959M-2004与结构紧固件一起使用的可压缩垫圈型直接拉力指示器规格(米制)Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structu
23、ral Fasteners Metric G 部分： 凹头螺钉IFI 小螺钉介绍 An Introduction to Small ScrewsASME B18.6.7M-1999 米制机器螺钉 Metric Machine Screws 2000 Edition; Revision of ASME B18.6.7M-1985(1993); Supersedes IFI 513: 1981 ASME B18.6.5M-2000 米制螺纹成型和螺纹切削自攻螺钉Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition;
24、 Revision of ANSI/ASME B18.6.5M-1986 SAE J1237-2001 公制自挤螺钉 Metric Thread Rolling Screws IFI 渗碳层深度测定的推荐方法Recommended Technique for Measuing Case DepthIFI-504 1997 公制自钻自攻钉 Metric Self-Drilling Tapping ScrewsASME B18.13.1M-1998 (R2003) 螺钉和垫圈组件 Sems(米制系列) Screw and Washer Assemblies - Sems (Metric Serie
25、s) Supersedes IFI 531: 1982 H 部分：机螺钉ASME B18.3.1M-1986(R2002) 内六角螺钉（米制系列） Socket Head Cap Screws (Metric Series) ASME B18.3.3M-1986(R2002) 内六角带肩螺钉（米制系列）Hexagon Socket Head Shoulder Screws (Metric Series) ASME B18.3.4M-1986(R2002) 内六角圆头螺钉（米制系列）Hexagon Socket Button Head Cap Screws (Metric Series) ASM
26、E B18.3.5M-1986(R2002) 内六角扁平沉头螺钉（米制系列）Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) ASME B18.3.6M-1986(R2002) 米制系列内六角紧定螺钉 Metric Series Socket Set Screws ASME B18.3.2M-1979(R2003) 米制系列六角板手和板手头 Metric Series Hexagon Keys and Bits ASTM A574M-2004 合金钢内六角螺钉(米制) Standard Specification f
27、or Alloy Steel Socket-Head Cap Screws Metric ASTM F912M-2004 合金凹头螺钉规格(米制) Standard Specification for Alloy Steel Socket Set Screws Metric ASTM F880M-2002 不锈钢凹头螺钉规格(米制) Standard Specification for Stainless Steel Socket Set Screws Metric ASTM F879M-2002a 不锈钢管座凸头及扁平埋头六角螺钉规格(米制) Standard Specification f
28、or Stainless Steel Socket Button and Flat Countersunk Head Cap Screws Metric ASTM F835M-2004 合金钢管座凸头及扁平埋头六角螺钉规格(米制) Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws Metric ASTM F837M-2002a 不锈钢内六角螺钉规格(米制) Standard Specification for Stainless Steel Socket Head
29、Cap Screws Metric I 部分 :铆钉IFI 铆钉介绍 An Introduction to RivetsIFI-110/550 盲铆钉相关术语表 Glossary of Terms Related to Blind RivetsIFI-505 公制盲孔抽芯铆钉 Metric Break Mandrel Blind RivetsIFI-509 公制闭端盲孔抽芯铆钉Metric Break Mandrel Closed End Blind RivetsIFI-520 Metric Pull Through Mandrel Blind RivetsIFI-522 公制盲铆钉的机械性能
30、试验 Mechanical Testing of Metric Blind RivetsIFI-530 米制钢结构开口自锁抽芯盲铆钉Metric Structural Splitting Self-Plugging Pull Mandrel Blind RivetsIFI-551 米制钢结构抽芯自锁盲铆钉Metric Structural Flush Bresk Pull Mandrel Self-Plugging Blind RivetsIFI-552 米制双鼓抽芯自锁盲铆钉Metric Multi-Grip Flush Bresk Pull Mandrel Self-Plugging Bl
31、ind RivetsIFI-553 公制击芯铆钉 Metric Drive Pin Blind RivetsASME B18.1.3M-1983(R2001) 米制小型实心铆钉(公称直径 12mm及以下) Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller Errata - October 1985 ASME B18.7.1M-1984(R2000) 米制通用半空心铆钉 Metric General Purpose Semi-Tubular Rivets J 部分:销和垫圈IFI 销和垫圈介绍 An Introduction
32、 to Pins and WashersANSI/ASME B18.8.3M-1995 米制系列螺旋弹簧销 * Spring Pins - Coiled Type (Metric Series)ANSI/ASME B18.8.4M-1994 有槽弹簧销(米制系列) * Spring Pins - Slotted (Metric Series)ANSI/ASME B18.8.5M-1999 米制淬硬圆头机械定位销钉Machine Dowel Pins - Hardened Ground (Metric Series)ANSI/ASME B18.8.6M-1999 米制系列开尾销 * Metric
33、 Cotter PinsANSI/ASME B18.8.7M-1999 无头 U 形夹销(米制系列) * Metric Headless Clevis PinsANSI/ASME B18.8.8M-1999 有夹 U 形夹销(米制系列) * Metric Headed Clevis PinsASME B18.22M-1981(R2000) 米制平垫圈 Metric Plain Washers ASTM F436M-2004 硬化钢垫片规格(米制) Standard Specification for Hardened Steel Washers Metric IFI-534 公制斜垫圈 Met
34、ric Beveled Washers ASME B18.21.2M-1999 锁紧垫圈（米制系列） Lock Washers (Metric Series) Supersedes IFI 532: 1982 K 部分:自攻螺钉IFI 公制机械紧固件单位应用规定Rules for the Use Units Applicable to Metric Mechanical FastenersIFI 什么是螺钉？什么是螺栓？ What is a Screw? What is a Bolt?IFI-527 公制螺纹紧固件通孔Clearance Holes for Metric Threaed Fas
35、tenersASME B18.6.5M-2000 米制螺纹成型和螺纹切削自攻螺钉 Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986 IFIIFI 工程委员会推荐孔径公制D,F,G,T 型自攻钉IFI Engineering Committee Recommended Hole Sizes-Metric Types D,F,G,T Tapping ScrewsIFI ISO 体系的极限与配合 ISO System of Limits a
36、nd FitsSAE J121M-1997 硬化并回火后螺纹紧固件表面脱碳层Decarburization in Hardened and Tempered Metric Threaded Fasteners IFI-142 氢脆风险的处理 Hydrogen Embrittlement Risk ManagementIFI 公制紧固件的重量 Weights of Metric FastenersIFI 紧固件术语 Fasteners TerminologyIFI 标准和规范 Standards and SpecificationsIFI 加工过程取样频率 In-Process Sampling
37、 FrequencyL 部分:质量保证IFI 紧固件质量保证的介绍INTRODUCTORY NOTES FASTENER QUALITY ASSURANCEASME B18.18.1M-1987(R1999) 通用紧固件的检验和质量保证Inspection and Quality Assurance for General Purpose Fasteners ASME B18.18.2M-1987(R1999) 大型机器组装紧固件的检验和质量保证 Inspection and Quality Assurance for High-Volume Machine Assembly Fastener
38、s ASME B18.18.2M SUPPLEMENT-1994 ASME B18.18.2m-1987 大型机器组装紧固件的检验和质量保证的补充 Supplement of ASME B18.18.2m-1987 Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners ASME B18.18.3M-1987(R1999) 专用紧固件的检验和质量保证 Inspection and Quality Assurance for Special Purpose Fasteners ASME B18.18.
39、4M-1987(R1999) 高度专业化设计应用中紧固件的检验和质量保证 Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications ASME B18.18.5M-1998(R2003) 检验和质量保证计划要求过程中的检验和控制 Inspection and Quality Assurance Plan Requiring In-Process Inspection and Controls ASME B18.18.6M-1998(R2003) 在第三方认可体系中生产的紧固件的质量保证计划 Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System ASME B18.18.7M-1998(R2003) 在消费者核准的控制计划中生产的紧固件的质量保证计划 Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan
